Available

CarPro CQuartz UK 3.0 Kit

CarPro

10CQK30

Now easy to wipe off even in hot humid climates!The next evolution of ceramic coating technology is here! CQuartz UK is world renowned for being the strongest ceramic coating on the open market! Rivaling many "pro grade" products, CQuartz UK... See more
Size :
With Reload :
 
BACKORDERED
Allow up to 14 days for shipping
-
+
$62.99

Click Here to be notified by email when CarPro CQuartz UK 3.0 Kit becomes available.

Product Details

Now easy to wipe off even in hot humid climates!

The next evolution of ceramic coating technology is here! CQuartz UK is world renowned for being the strongest ceramic coating on the open market! Rivaling many "pro grade" products, CQuartz UK has been embraced by fans all across the world however CarPro is never one to wait for others to catch up so they set out to improve CQuartz UK even further! The new and improved CQuartz UK 3.0 now features easy use in all climates!

In our REAL WORLD tests we have found CQuartz to outlast the competition in side by side, apples to apples torture tests. One of the many reasons we continue to offer CQuartz as our ceramic coating brand of choice is their commitment to innovation and the simple but critically important fact that CarPro continues to tell us and you the truth and base their claims on reality.

CQuartz UK 3.0 offers incredible resistance to chemicals, salt, and environmental damage as well as provide excellent UV protection! The high silica-quartz content creates a hard glassy layer across painted or gel-coat surfaces. CQuartz UK adds incredible levels of depth to the paint along with unbelievable water and dirt repellency and a rugged durability measured in years!

Buy yours today!

Kit Includes:

(1) 30ml bottle of CQuartz UK 3.0 (Use 15ml+/- per coat - average size car)
(1) 100ml bottle of CarPro Reload Silica Spray
(1) 16" Microfiber Suede Towel
(1) CarPro Foam Applicator Block
(4) 4" MF Suede applicators
(1) Rear View Mirror Hanger (Optional)
Features:
Now easy to use in a wide range of temps!
Protection and gloss superior to that of competitor "professional coatings" but easy to use for all detailers
Extremely high Sio2 Quartz content
Deep gloss that lasts!
Easy maintenance with "self cleaning" properties (Stays cleaner than other products on the market)
Resistance to wash induced marring, bird dropping damage, stains, high or low temperatures, and traffic film
Repels UV rays, water, oils, dirt, and contaminants
Specifications:
Durability: 2 years or more
Average Thickness: 1~2 Micron per coat
Coverage 15ml per coat +/-
Water contact angle: 110å¡
Minor filling
Recommended working temperatures: 40F to 100F
Recommended Surfaces:
Paint
Metal
Plastic
And more
Tips:
If contamination exists, Iron X and clay your vehicle before polishing.
To gain the most from Cquartz your vehicle should have all surfaces 100% clean and paint polished to a high level
Use CarPro Reflect to achieve an incredible high gloss finish in less time with no fillers
Use CarPro Eraser to remove any oils leftover after polishing - This is critical to ensure durability of CQuartz
We recommend Coating Removal Towels: CarPro 2 Face (No Lint) 16" x 16" - Blue/ Orange 10 Pack, Microfiber Madness Slogger (16" x 16") or Edgeless White Polish Towel - 16" x 16"
We recommend Extra Suede Applicators if applying more than 1 coat - CarPro Suede MicroFiber Applicator 4"x4" 10 PACK
Finding the right time to "level" (wipe off) excess coating after it flashes:
Start with a single 2ft x 2ft test section to determine flash time before applying coating to entire vehicle. Flash time will vary depending on temperature, humidity, air movement, paint type, how thick it is applied, and more.
If coating is applied thick then the coating will take longer to flash. If applied thin it will flash faster. Hot temps will cause it to flash faster, Cold Temps will cause it to flash slower. Air movement will cause it to flash faster.
When it starts to flash you will see colors that will make the coating look like a rainbow or oil slick. You will see hints of blue, purple, red, and yellow.
Remove too soon and it will be oily with no grab to it when wiping. If you wipe off too soon it will not give the coating a chance to bond.
Remove too late and it becomes hard to remove.
The time to remove is when you feel just a little push back or "grab" against your towel but it is not difficult to remove and it is no longer oily. It may leave some streaks at first but with the second wipe of a fresh clean side of the towel, the streaks should wipe off and the paint should be nice and clear.
Lighting - Lighting is key to make sure you wipe off completely when you do wipe off. You don't want spot lighting like would use on paint correction but ambient lighting. Look at the paint from different angles to make sure none of the coating is missed. Spot lighting will "wash out" the high spots visually. Think of it like this: when you wipe off a sealant you have hours to go and check it again outside or in other lighting. In this case you need to pay attention as you go rather then wait an hour. Thorough removal of the coating is very necessary as any product left on the surface will harden and require polishing to remove soon after.
Cquartz UK 3.0 ‰ÛÒ Depending on the environment you are working in, it may start to become somewhat difficult to remove within the first 2-4 mins. It may feel tacky and or super grippy and it will smear and leave streaking. If that happens you will want to wait an additional 1 min and do a small test wipe to check. Continue checking in 1 min increments until coating wipes off clean and easy.
High spots - A high spot is excess coating that was not leveled (wiped off). Most of the time it will look like an application mark. If you discover to them within minutes then a bit more product will lift them. Otherwise you would use a dot of finishing polish such as CarPro Essence or Reflect and rub the high spot off, wipe it down with Eraser or your IPA of choice, and then re-coat that area and onto the area around it by about 6". Then start wiping off the perimeter immediately and slowly work inwards to feather it until you reach the area you are trying to re-coat at the appropriate time.
Directions: Use only in good ambient lighting
Precautions:

Do not apply in direct sun or on hot surface
Do not re-use 4" Suede applicators
Do not re-use the towels you used to buff off with on paint
Wear hand protection
Wear respiratory protection such as painters mask
Read "Tips" above before coating

Wrap a 4" mf Suede around the grey side of applicator block.
Shake CQuartz UK.
Slowly open bottle and drag one or two lines of product down the applicator.
Spread across paint in a criss cross pattern approximately 2 sq ft at a time depending on conditions.
Buff off as soon as it flashes (within 2-5 minutes depending - see tips above) using a CarPro No Lint Ultra Towel 16" x 16".
Be sure to remove all excess residue and only then do you move to the next section.
Switch out the 4" Suedes every 2+/- panels.
Additional coats may be applied with 45-60 minutes or wait until the following day if you are beyond 60 minutes. CarPro recommends 2 coats. Max Layer - 3 coats.
Apply Reload after final coat within 30- 60 mins. Wait until next day for Reload if you miss the 30-60 minute window or at least a minimum of 12 hrs.
After Tips:
Keep surface dry for at least one hour after application (For best results keep dry 24 hours)
Gently wipe any water off the surface during the first 24 hours after application
Avoid detergents and chemicals for 5 days after application
If it is dry and the air is clean outside then you may park the vehicle in direct sun after application to speed the curing.
Coating Maintenance:
The best thing to do is start using CarPro Reset to wash with regularly. Other soaps can leave residue that temporarily messes up the beading and allows dust and dirt to stick more readily.
Wash Mitt:
Microfiber Madness Incredimitt ‰۬(Recommended for daily drivers and most cars - This mitt is easiest to maintain and is extremely durable as well as washing out most easily)
Merino Wool Wash Mitt (Recommended if car has extremely soft paint or car does not get extremely dirty)
Drying Towel: CarPro or Microfiber Madness
Quick Detailing‰۬: CarPro ECH2o Concentrate and Microfiber Madness Crazy Pile towels (need about 3-6 towels)
Occasionally (every 3 to 6 months) decontaminate surface with CarPro Iron X. Use during wash cycle (after Reset) and as directed
If using CarPro Reload as topper: use every 3-12 months, for special occasions or any time you like.

Reviews

QUESTIONS & ANSWERS

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question

Recently Viewed Products